I have a three way switch that is working fine, with a mix of three traditional bulbs were and 2 flush ceiling mounted single unit LEDs. I tried to install a Caseta wireless dimmer on a two way switch with four flush ceiling mounted, single unit LEDs.
I connected the wires correctly. When I turn the power back on all four lights are lit at a low level dim setting, I would guess about 25%. The switch does not respond, and cannot be programmed it won't turn the lights on or off. The traditional toggle switch works just fine.
Does this have something to do with low wattage overall of the 4-leds- does it mean i need a minimum load ( though I am not sure what that really means). Bulbs are compatible based on the website.
Any help is appreciated, and thanks in advance.