Any suggestions to get geofencing to work?
Radius appears active, other functions work. App has to re-load each time used, not sure how Geo will function with App asleep.
Lutron tech support refuses to respond.
Any suggestions to get geofencing to work?
Radius appears active, other functions work. App has to re-load each time used, not sure how Geo will function with App asleep.
Lutron tech support refuses to respond.
First make sure that the Lutron app has access to your location. If you're using an iPhone go to Settings >> Lutron and make sure that the Location setting is set to "Always", Background App Refresh is enabled, and that Use Cellular Data is enabled. If that is all setup correctly try increasing the radius size. I had to do this to get reliable results.
It's just an additional piece of data to help the phone more accurately determine its GPS location. The more device signals that the phone can hear will help it determine it's GPS location. This is all determined by the location software on the phone itself.
This is not something that Lutron apps themselves use. The Lutron app just asks the phone for it's location, and it's up to the phone to to determine it's proper GPS location.
My geofencing was also not working as expected today. Settings matched those mentioned by asherrick and I also had a Bluetooth turned on. At the time, my radius was set at 1000 feet. I increased the radius to 5400 feet and still had no luck... UNTIL I was closer to 5 miles outside of the radius. So, Brian W's recommendation seemed to work, but with a delay.
Seems as though I jumped the gun on my follow up post. The scene did activate, but after a considerable amount of time within the 5400 foot radius - more than 15 minutes.
Have you tried restarting your phone?