Thanks Thanks:  0
Likes Likes:  0
Results 1 to 3 of 3

Thread: Maestro: configure on-level? time-of-day/light-level?

  1. #1
    Junior Member
    Join Date
    Mar 2019
    Posts
    1

    Maestro: configure on-level? time-of-day/light-level?

    For the following product:
    http://www.lutron.com/en-us/products...aspx#?cat=PC21

    First, is there any way to configure a fixed on-level? For example, that it always comes on at 35% when tapped 'on'? And when double-tapped will go to full brightness?

    Second, is there any way to have it so when the ambient light level is low (or nighttime), that the light level comes on at 35% when tapped on? And when the ambient light level is high (or daytime)? Except when double-tapped of course, where it will go to 100%?

    I'm trying to find the right product for a hallway light where I don't want people to be blinded if they're going to, for example, the bathroom, in the middle of the night. Without having to do scripts and using home automation controllers, etc.

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    1. In the design tab of the RR2 software, right-click on the dimmer then select "advanced settings." You can type in the level under "On Level." You will have to upload for the changes to take effect.
    2. You can add Radio Powr Savr sensors to RR2. They have some cool internal features plus RR2 can do some additional things with them.
    http://www.lutron.com/en-US/products.../overview.aspx
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

  3. #3
    Junior Member
    Join Date
    Jan 2016
    Posts
    28
    Quote Originally Posted by Lindahl View Post
    For the following product:
    http://www.lutron.com/en-us/products...aspx#?cat=PC21

    First, is there any way to configure a fixed on-level? For example, that it always comes on at 35% when tapped 'on'? And when double-tapped will go to full brightness?
    You can do that if you use them stand alone or with Radio RA2. If you use RA2 Select the feature is disabled.

Similar Threads

  1. Adjusting Brightness of Light Level Indicator
    By johnnyjr in forum General Discussion - CAS
    Replies: 2
    Last Post: 04-01-2019, 11:41 AM
  2. Intermittent light level LED behavior
    By jeffw in forum Troubleshooting - HWQS
    Replies: 2
    Last Post: 09-27-2018, 07:54 PM
  3. Maestro dimmer not working, light stays on lowest level
    By Reppt in forum Troubleshooting - Controls
    Replies: 1
    Last Post: 08-22-2018, 09:21 AM
  4. MACL-153 occupancy sensor always turns light on to Max dim level
    By dethbysexy in forum Troubleshooting - Controls
    Replies: 5
    Last Post: 03-29-2018, 01:17 AM
  5. Caseta dimmer - when on full light level is diminished
    By Drconner in forum General Discussion - CAS
    Replies: 3
    Last Post: 11-09-2016, 01:19 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •