Thanks Thanks:  2
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: Palladium and LED count

  1. #1

    Palladium and LED count

    We are installing a large project with 96 Palladiom keypad units (2 and 3 gangs quickly add-up).

    Then it hit us, we are gonna be short one PS (are we ?).

    I don't remember seing the LED count in the QS software. Nor in QS documents am I right ?

    Is there a spreadsheet somewhere or something like the old LED calculator ?

  2. Thanks digit1 thanked for this post
  3. #2
    Authorized Lutron Contributor
    Join Date
    May 2013
    Posts
    402
    Quote Originally Posted by mehuneau View Post
    We are installing a large project with 96 Palladiom keypad units (2 and 3 gangs quickly add-up).

    Then it hit us, we are gonna be short one PS (are we ?).

    I don't remember seing the LED count in the QS software. Nor in QS documents am I right ?

    Is there a spreadsheet somewhere or something like the old LED calculator ?
    Dear mehuneau,

    Thank you for the inquiry.

    The Palladiom keypads are 1 PDU per column. This information can be found in the spec sheet on page 2.

    http://www.lutron.com/TechnicalDocum...369881_ENG.pdf

  4. Thanks mehuneau thanked for this post
  5. #3
    Thanks.
    (PDU it is !)

Similar Threads

  1. Count down timer feature for Ra2
    By Tom L in forum General Discussion - RA2
    Replies: 22
    Last Post: 11-06-2019, 06:11 PM
  2. Do Picos always count towards the 50 device limit?
    By asherrick in forum General Discussion - CAS
    Replies: 3
    Last Post: 05-18-2015, 11:18 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •