Hi all,
First, apologies as I think this is a pretty frequently discussed subject and I am aware I am using this product out of spec. However, I haven't seen any post that address my scenario specifically so I thought I would at least post and see if there is a possible solution.
I have a stacked dual dimmer switch, MA-L3L3, with one switch going to 3 60w pendant lights. The second switch is going to a dimmable 120v to 12v transformer driving about 25w of LEDs (under cabinet lighting). These are running on a shared neutral.
The LED lights turn on, off and dim with no issues at all.
The issue is strangely enough, that the incandescent lights are flickering, but ONLY when the LED lights are OFF. If the LEDs are on, then the incandescent lights also turn on, off and dim properly.
Taking the LED lights off the switch altogether also result in the incandescent lights functioning properly.
Does anyone have any suggestions? As plan B, I am considering switching out for MA-L3S25, which is a stacked switch but only one of the switches has a dimmer in the hope the incandescents will run properly with a simple on and off switch.
Thanks in advance!