Hi Everyone,
I want to integrate our Lutron Homeworks QS Lighting into Control4 system, and have some problem:
1. I have connected Lutron Homeworks System and Control4 System over Ethernet by having them on the same network.
2.
On Lutron HomeWorks QS 15.5.0 side I have done the following:
- Connected Lutron Processor HQP6-2 via Ethernet(the IP is reserved in router).
- All the lighting work fine in Lutron Homeworks System.(Via Hybrid Repeaters)
- Go to "Tools->Configure Integration" and set that username and password in Telnet login for the Control4 system to log in.
On Control4 Side:
- Installed HomeWorks QS Processor driver [Lutron HomeWorksQS Processor (OS 2.9+) 2017-12-20] in Composer 3.2.0;
- Configured The Lutron processor driver by Giving IP address to the Processor(Connections|Network|IP Network).
- Configured The Lutron processor driver by Giving Network User name & Network Password to the Processor.
- Configured The Lutron Homeworks QS Dimmer with device address( a number I get from HomeWorks QS 15.5.0| Tools->Configure Integration).
- I refreshed the navigators in Control4 Composer Pro OS 3.2.0 after that.
But I still can not control the lighting via Control4 OS3 App.(Lutron Homeworks QS Dimmer Interface)
Please Advice.