I got these dimmers activated at some point but things weren't quite right. So I deleted the Lighting Location and Zone and pushed the files to the main repeater. All fine ... I then reset the dimmers using the three tap method...and yes on both they rapidly flash up and down...I then triple tap again and the lights scroll slowly...go into a fuzzy mode then reset.I then create the devices again in the design environment ... save the file and head to the activation tab to reactivate the devices. Unfortunately they will no longer activate ... even after the triple tap reset. I really don't want to clear out the whole main repeater ...Need advice as to what I can try. Also note I had accidentally associated an Occupancy sensor directly with one of these devices. I made sure to reset the Occupancy sensor as well...although I can't confirm that it truly reset as the second triple tap I only get one slow flash instead of multiple slow flashes ... AT a loss for how to proceed.