-
Control low voltage landscape lighting with Caseta?
Hi all,
I just wanted to get some information on using Caseta to control my low voltage landscape lighting. My landscape lights are Volt Lighting low voltage LED fixtures that are wired into a Volt Lighting transformer. I have 3 transformers that are all inside my house and plug into GFCI outlets. The transformers all have their own timers which work OK, but they all come on at different times despite being set to come on at dusk.
I currently have the Caseta system and use it to control my outside lights that are hard wired into my home circuit breaker. These are porch lights, lights above my garage doors, etc. So that leaves me with 4 different timers that all come on at slightly different times. This is obviously not the most elegant solution and I'd like to get everything on the Caseta system.
I was thinking of just using the lamp dimmers and plugging the transformers into them, but the transformers are all 3 prong plugs and the lamp dimmer only accepts 2 prongs. Would it be safe to use an adapter to make this work? Is there a better solution? Thanks in advance for your help!
-
First of all, do not use an adapter to convert 3-prong plugs to work with 2-prong receptacles, ever ever ever. This bypasses the equipment ground, designed to prevent electric shock.
Anyway,
I highly doubt your landscape lights are dimmable, so you'd want to install a switched outlet. Assuming this is in a garage or somewhere it doesn't need to be beautiful, I'd recommend you remove the existing outlet, install one of these extension rings, and install a Caseta switch and decora receptacle (don't cheap out on receptacles), finishing with this type of cover to finish it off. This is not nearly as simple as using a lamp dimmer, but it's the right way to switch an outlet and make everything safe and to code.
Hope this helps!
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
Originally Posted by
evankirkhart
First of all, do
not use an adapter to convert 3-prong plugs to work with 2-prong receptacles, ever ever ever. This bypasses the equipment ground, designed to prevent electric shock.
Anyway,
I highly doubt your landscape lights are dimmable, so you'd want to install a switched outlet. Assuming this is in a garage or somewhere it doesn't need to be beautiful, I'd recommend you remove the existing outlet, install one of
these extension rings, and install a Caseta
switch and
decora receptacle (don't cheap out on receptacles), finishing with this type of
cover to finish it off. This is not nearly as simple as using a lamp dimmer, but it's the right way to switch an outlet and make everything safe and to code.
Hope this helps!
Thank you for taking the time to respond. You are correct, my landscape lights are not dimmable and the outlets are in my garage and in my basement. How hard will it be to add a switch to an outlet that doesn't already have one? I'd prefer not to tear my walls apart in order to achieve this.
I'd love to see Lutron come out with a WiFi plug that is compatible with Caseta in order to more easily do stuff like this. There are so many of them out there and I think Lutron would have a hot seller if they made one.
-
Originally Posted by
mummer43
I'd love to see Lutron come out with a WiFi plug that is compatible with Caseta in order to more easily do stuff like this. There are so many of them out there and I think Lutron would have a hot seller if they made one.
If you have a Google Home, Amazon Alexa, Homekit (or some other system that works with your other Caseta stuff too), just use that to schedule everything instead of the Caseta schedule. Then you can use whatever wi-fi plug you have, and have the other system turn both it and Caseta switched lights on at the same time. If you're using Homekit, make sure it's a Homekit plug, since most of them aren't.
-
Originally Posted by
mummer43
Thank you for taking the time to respond. You are correct, my landscape lights are not dimmable and the outlets are in my garage and in my basement. How hard will it be to add a switch to an outlet that doesn't already have one? I'd prefer not to tear my walls apart in order to achieve this.
I'd love to see Lutron come out with a WiFi plug that is compatible with Caseta in order to more easily do stuff like this. There are so many of them out there and I think Lutron would have a hot seller if they made one.
That's probably not going to happen. I would love to see the 15amp appliance module make it's way to Caseta, but it is still a differentiator for RadioRA.
You could always go a minimal route of remodel. Take the existing outlet box and remove it. Make it a two gang (space) and install the caseta switch next to the plug. Wire the switch with constant power. Break the tabs on the outlet to separate the upper and lower outlets. Make sure the upper outlet has constant power, and use the Caseta switch to power the lower outlet. Plug the transformer into the lower outlet.
-
Originally Posted by
mmascari
If you have a Google Home, Amazon Alexa, Homekit (or some other system that works with your other Caseta stuff too), just use that to schedule everything instead of the Caseta schedule. Then you can use whatever wi-fi plug you have, and have the other system turn both it and Caseta switched lights on at the same time. If you're using Homekit, make sure it's a Homekit plug, since most of them aren't.
I think the Homekit idea is worth exploring. Thanks for the tip!
-
Originally Posted by
mummer43
Thank you for taking the time to respond. You are correct, my landscape lights are not dimmable and the outlets are in my garage and in my basement. How hard will it be to add a switch to an outlet that doesn't already have one? I'd prefer not to tear my walls apart in order to achieve this.
I'd love to see Lutron come out with a WiFi plug that is compatible with Caseta in order to more easily do stuff like this. There are so many of them out there and I think Lutron would have a hot seller if they made one.
Didn't think of a HomeKit solution. If it's worth anything to you, adding a switch on the surface (like I described) would not be disruptive whatsoever to the walls, and rather straightforward (if not particularly beautiful).
Glad you seem to have found a solution!
-
I had a case system that was pretty good before I installed the water system. I don't recommend using the Caseta since they stopped updating their older devices' applications.
-
Originally Posted by
eleuteriahunt
I had a case system that was pretty good before I installed the water system. I don't recommend using the Caseta since they stopped updating their older devices' applications.
It is better to look for a system that will allow you to set one timer for all your lights or divide lights into groups so each group will have its own timer. If you place, id rather consults with a professional landscaping and design company like this one, jscustomlandscaping.com.They helped me a lot with setting the beautiful landscape for my garden and setting a good lighting system inside and outside of my house.
-
I do this with my outdoor lights. I have a bunch of VOLT 12V LED lights that run from a transformer. I put a circuit in my panel for the outdoor lights, wired a PD6-ANS on/off switch in and a outlet next to each other in a duplex outdoor box. I put a raised outdoor cover on it and plugged my VOLT Transformer into that. I put them both in the same box outside as my main power panel is outside, it was just easier then running the circuit back into the house for a switch. I know the Caseta stuff is not rated for outdoors but it's been in place for 6 years with no problem. Works perfectly, on 30 min before sunset everyday, of at midnight, 1am, 2am, 3am, 4am and 5am. I put the extra off automations in because a I keep a Pico in my car that I use to turn on the outdoor lights if I get home late.
-
Post Thanks / Like - 1 Thanks, 0 Likes