I have a shade that is a normal roll that is mounted on a door and recently added a Baldwin smart lock to the door, which gets in the way of the hembar on its way down. It kind of bumps it and corrects itself, but I think a better solution would be to somehow switch the roll to a reverse roll type. I'm just wondering if this is a possibility without buying a whole new shade. This is just for my personal shade, not a customer's, so I don't mind tweaking it or getting creative in doing it. I'm guessing one way would be to roll it all the way out, remove the fabric from the roller, roll it all the way back to the "open" position, then reattach the fabric going the other way, then set the limits again. Just need some ideas from anyone that might have tried this before.Thanks