I have several standard Caseta In-Wall Dimmers (PD-6WCL) which work great with my lights and Wink hub. I bought an ELV+ (PD-5NE) dimmer because one of my LED lights flickered with the 6WCL. The 5NE is great with the tempermental high-end LED light. In fact, it provides much better dimming range. However, I cannot connect it to the Wink hub by following the instructions that work fine for the 6WCL dimmers. When the hub is in "pairing" mode, it blinks the lower LED on all the 6WCL dimmers. However it does not blink the LED on the 5NE. I've tried a variety of alternative ways to connect (since the LED does not blink), but cannot find a way to get it to pair with the Wink hub. I know the 5NE is good because I have a couple of them and neither will connect. However, they do pair with the Pico remote. I bought the 5NE from Amazon, and the specs for the 5NE say it does work with Wink. Any help appreciated.