![Quote](images/misc/q.gif)
Originally Posted by
BJBBJB
DougD,
I would be glad to help. You need to do all the programming of the Lutron RA-IR per the usual Lutron scene process. Note if you have a serial Lutron module, you still also need the IR one and have to program it from scratch.
Then I wired an IR blaster from the Harmony Hub to the RA-IR device.
Finally for the Harmony hub,I setup a new piece of equipment by searching the IR database for "Lutron RadioRA. Ignore the prompts that you can control the device over the network or something. You cannot, just IR. If you are having issues on the tablet Harmony software you can do the initial setup on the PC software. Thats how I did it and it symcs to the hub and tablet.
Once the equipment is setup, you can trigger IR codes for Lutron scenes via activities in the Harmony programming. Or just access the scenes from the equipmemt page.
There are some challenges with the Harmony on and off logic but you can work through that.
Hope that helps.
BJBBJB