-
HWQS to Ra2 integration
Can anyone help with doing a button press from HWQS to RA2 main repeater's 100 buttons and get feed back from the LED's
Both processors are on the same ethernet network.
-
Originally Posted by
jmota
Can anyone help with doing a button press from HWQS to RA2 main repeater's 100 buttons and get feed back from the LED's
Both processors are on the same ethernet network.
With Homeseer you can do it but you will need the two separate plugin. The led's status or the button press or release.
-
Originally Posted by
jmota
Can anyone help with doing a button press from HWQS to RA2 main repeater's 100 buttons and get feed back from the LED's
Both processors are on the same ethernet network.
Why not just talk ip ? in the QS setup 3rd party ethernet controller and then just send the presses to Ra2 over ethernet ? No need for Homeseeeeeer
100 buttons and Led is a lot to write !!!! Just seen you want 100 buttons
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Dislikes