I am a previous insteon user and hated the system. I was told that Lutron Caseta would be my happy place. It totally was until I ran into this weird issue. I have a house about 4200 sq ft that has the bridge and about 40 devices attached the the Lutron app. All works perfectly. I then wanted to expand the system to my guest house and I added all new Caseta light switches and dimmers to my Guest House which is approx 30 feet away from my main house. I added a Repeater and it connected perfectly which would make sense that I would now be able to add the light switches within feet from the repeater. Well, it doesn't work. Not a single Lutron Device in the Guest house will connect to the system. Again, the repeater connects, but I just cant add anything. Here are steps I took already.1) I moved the repeater to several locations, and they connected in all or most of them. (tried to add a switch that is 3 feet away from the connected repeater and it didn't work)2) I unplugged the Bridge and then unplugged the repeater and then reconnected it to the network.. I waited for all to be connected and then again, (tried to add a switch that is 3 feet away from the connected repeater and it didn't work)3) I factory reset the switch, then again tried to (add that same switch that is 3 feet away from the connected repeater and it didn't work)4) I turned off the switch (pulled the pin out) then reset both the repeater and the bridge and reconnected it and again, tried to add that same switch that is 3 feet away from the connected repeater and it didn't work)5) I called customer service and spoke to them and they said that I should call back during regular business hours. He was stumped as well.I am stumped and tried everything. Does anyone know if this is a normal occurrence and what the issue can be? Thanks in advance.