Originally Posted by
randyc
If you have a 0-10v fixture, the 6NA will NOT control it. However, some manufacturers make a combination driver where if you don't use the 10v control, you can use a non-10v dimmer. If you have a combination driver, the 6NA may be having problems identifying which type of dimming to use. You can force the 6NA into either forward or reverse phase so it doesn't have to figure it out. The LMJ-5T is designed to me mounted to a junction box (not a wallbox). It does have control buttons on it but the intent was to control it from a keypad, Pico, etc. 0-10v controls also require a low voltage wire from the control to the driver.