Hello,Has anyone used a Somfy Universal RTS Interface II (URTSI II-16 Channel) with their HomeWorks Illumination. I am looking for any RS232 code to control the shades with this unit.Thank you,JR
Hello,Has anyone used a Somfy Universal RTS Interface II (URTSI II-16 Channel) with their HomeWorks Illumination. I am looking for any RS232 code to control the shades with this unit.Thank you,JR
Thank you for your post gaspower.
You can find the RS232 integration protocol here at http://www.lutron.com/TechnicalDocum...20Protocol.pdf. This is the integration protocol for HomeWorks Illumination.
Thank you very much for the link.JR
Hello Josh,Thank you for the link to the manual. Sorry, but I am lost on this one. There must be some sort of driver to add to the processor? Currently I am using single Somfy Universal RTS Receiver Control for each shade controlled by a CCO by Lutron. This was easy as the Lutron Homeworks processor can see the CCO board. Do you know how to make the HW to see the RS232 16 channel RTS interface. I think you need to import a driver. Thank you
Hello gaspower
We would recommend emailing in to hwsupport@lutron.com. From there we can provide more support to help get this resolved for you.