Hi all,
I have a acquired a HW illumination system comprising of a series 4 processor, several GRX 3000 series, sivoia blinds and curtains and all the trimmings to boot.
I am looking to add LEDs a DMX output to the system to recall scenes in a domestic application and as far as I can tell I have a few options.
1/ source and add LUT-DMX
2/ add cue server mini (which I have) and execute commands over IP
3/ add cue server mini (which I have) and execute commands over RS232
My questions are as follows,
As a newbie to Lutron, Which would be the easiest to achieve the end result, 3rd party or LUT-DMX?