Here's the scenario: in a home there are 15 locations with grafik t dimmers originally planned to control LED strip accent lighting. The standard LED strips were changed to put a z-wave RGBW controller and RGBW LED strip lights there instead (tied into a z-wave based automation system that is also integrated with RRA2). This causes a problem, because the RGBW controller requires constant 24v DC.One solution would be to replace the dimmers with regular switches. No problem.But I'm wondering if there is a way to program the dimmer to act strictly as on/off switch instead of dimmer. Subsequent up/down presses can be intercepted by the z-wave system and control dimming on the RGBW controller directly.Is that possible?Thanks!