I’m trying to replace the switch listed in the title with a PD-6wcl. The currently installed switch is a single pole switch with 2 brass screws , 2 black screws, and the ground. Each black screw Has a hot jumper coming from its own black screw on a single pole switch of the same style that controls the flood lights. The two brass screws both have a wire hooked to them that runs up the conduit to the lights. There are four light fixtures powered by this one switch. I have pictures but I do not see how I can post them. Can I replace this switch with my Lutron switch? And if not what kind of a smart switch is available that I can replace it with?