I found this Pico Module that I want to place on my bed headboard, and control a lamp module (Table Lamp lighting), and the ceiling fan on/off (Fan only), but i'm finding it hard to cross reference what this pico keypad is actually compatible with. can someone help?
Project 1:
Pico Keypad
PJ2-4B-G-L41
It says on the Datasheet that it is only compatible with "
HomeWorks® QS and Quantum® systems only"
Surely there is a Lamp Module, and On/Off switch available with these systems, but I haven't had much luck hacking through all the different systems luton makes.
Project 2:
Somewhat unrelated with the Pico Keypad module, I want to automate some lights Porch, Chandelier, Garage outside lights. The Garage outside lights are kinda far from the Front Porch and Chandelier, so i'm kinda concerned about the range of the controller, and I also have Control4 with Zigbee on the door locks, so I'm not sure about interference.
Project 3: I have two sets of recessed lights set of 2, and a set of 3 that are operated by separate switches on either side of the room. I want to tie these lights together, being if I turn on one of the switches, it turns on the other switch automatically. I'm sure there's stand alone switches that can do this, but I think project 2 will require a controller anyways.