Hello!
I have searched the forum and no one ever seems to give an answer to why led's will flash on, then go out, and then fade back on to full.
I have the Caseta Wireless PD-6WCL rated for 150w LED load.
I have the Cree DR6-1100L-27K-B1, 16w LED bulb. I know this bulb is not on the compatibility list for the Caseta, now! I thought the Cree bulb was on the Lutron site but it is not. Cree's website does state that the Caseta Wireless is recommended as working best with the bulb. There are 9 lights on the circuit for a total of 144w.
I have tried removing one of the bulbs to lighten the load. I have tried adjusting the High and Low Trim. All with no luck. The only thing that seems to work is to push the up button on the dimmer and the lights turn on, without the flash to the low setting, and then push the on button to go to full brightness. This will work for the short term but don't want to have to keep doing it for long.
Lutron Customer Assistance recommended buying the PRO dimmer with a neutral leg.
So, I am wondering if anyone else has solved the flash issue by using the PRO dimmer, or some other method. I don't want to buy a $100 dimmer switch to find out it doesn't work on top of the $60 for the one I have already purchased.
Thank You!