HiI am having issues trying to get a PD-5WS-DV-WH switch working with my Monte Carlo Clarity ceiling fan. I basically want to control power to the fan via the switch. It has a wireless remote and uses the last setting when powered on. We already have a switch for it, I am just replacing that switch with the Lutron so we can control it wirelessly. I went with this switch because I lack a neutral line at the switch box. My initial install just swapped out the switch. Nothing worked, the fan relay just clicked and shut off, and I had the flashing red light on the switch. I then installed the LUT-MLC cap at the fan box. It seemed like it worked at first (with maybe an extra click or two) as the fan and it's light started working, but after we used the remote to shut off the fan it no longer works. Same as before.. click, nothing. It just seems like there isn't enough load to satisfy the switch.Looking for ideas of what could be wrong, or if there is an alternate load I can install which will make the switch happy.. or if I'm just not gonna be able to make this work. (Running a neutral line to the switch isn't an option at this time..) Thanks in advance