When using the open/close/stop programming model on a button (seeTouch connected to QS processor) to control a venetian blind, how is tilt effected? Or does this programming model only encompasses lift?
thanks
When using the open/close/stop programming model on a button (seeTouch connected to QS processor) to control a venetian blind, how is tilt effected? Or does this programming model only encompasses lift?
thanks
In the Homeworks QS programming, the open and close commands are presets and can be set by going to "program", then "shade presets" in the GUI to determine both the lift and tilt settings.
By default, the 'open' command sends lift to 100%, and tilt is unaffected. The 'close' command sends the lift to 0%, and the tilt to 0% (closed).
want to control three windows with my home server.Would I just need a 6 way 12V USB relay to do this? If I use 12V motors or would a 2 way relay be enough depending on the external power supplyAnd than program a script that switcheswindow 1 up - window 2 up - window 3 up/ windows UpAnd the other relayswindow 1 down - window 2 down - window 3 down/ windows downMaybe I could integrate to pull sunrise and sundown times from the internet to time every thing.Any flaw in my setup?
Which Lutron shades are you controlling, or planning to control?
Umm Brian you did notice that this is a spammer, right??
Convergence Technologies Raleigh, North Carolina
www.convergenceusa.com
Thank you for the post. Very helpful.
2D 3D Floor Plan Company