-
Uploading can not be done using HWQS v.10.7.0 or v.10.6.0
Hai,
Is there anyone have try to upload using the newest software v.10.7.0 ? i try to use this version because the owner want to connect the Lutron system to Alexa, but when i upload the program it always end in "compiling and auditing file 121 of 232 (preset)" and not moving at all. any idea ?
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
-
I've had luck with Help/Repair Project File on a 10.3 upload that would lock up somewhere around there...
-
Hello stevi,
Thank you for your post.
We recently launched the 11.0 release for HWQS. Try this. If the issue remains then send in a support file to hwsupport@lutron.com and we can further investigate the issue.
-
Thank you for reporting the same issue I am having. Also thank you to Weekscolin for your tip. It seems to have worked for me. I have just downloaded 10.7 and converted a project from 9.4 and have had 3hrs of getting stuck at the same point (81%) and not moving. By doing the repair project it saved a new version and has taken 6mins to upload.
- - - Updated - - -
Thank you for reporting the same issue I am having. Also thank you to Weekscolin for your tip. It seems to have worked for me. I have just downloaded 10.7 and converted a project from 9.4 and have had 3hrs of getting stuck at the same point (81%) and not moving. By doing the repair project it saved a new version and has taken 6mins to upload.
-
Hi guys,
Also had this issue on 10.7.0, likewise did a repair and solved the problem.
Initial upload was hanging on 121, waited 15 minutes and gave up!
Ash