Not sure if this should be in trouble shooting or programming. First the background, installed several triathlon honeycomb shades. Paired them with Pico 4 button control for a month while my wife decided on what type of programming she wanted. Just recently brought the laptop home and added the shades to the RadioRA 2 Essentials file I have for our house. Shades went into the design, program, activate and transfer no problem. The issue I have is that the Pico remotes are not working with the shades. First thing I did was to delete the Pico's and re-enter them. No luck. Then I factory re-set the pico's and re-entered them, still no luck. The existing RR-T5RL-SW that was already on the system works with the shades (I programed a up button, a down button, and raise/lower buttons for the room the control is in). And the existing RRD-W7B-WH also works with the shades after I programmed an all up button and an all down button. I have yet to program an event such as all down at sunset.
So the question is what am I doing wrong with the Pico 4 button control for them not to work once programmed, activated, and transferred in essentials? Do I need to delete the shades, factory reset, and then add back to the program to be paired with the Pico since I initially used them via Pico control out of essentials?
Thanks for any help or suggestions.