These may be repeats but...
1. I would like the ability to set the default dimmer model. I want to be able to say the 6ND is my default and change it when I have to.
2. When adding a PRO dimmer I would like the ability to set the phase control on that page.
3. I would like the ability to change the default phase control of the pro dimmer.
4. I would like the ability to set the default load type of hybrid keypads.
5. Actually, I think there should be a way to set the default properties for every device.
6. There is a sweet yellow warning on the design tab to select the phase control for PRO dimmers. It would be sweeter if there was an indication of what the current setting is. A simple "F" or "P" displayed would be a huge time saver. I just did a project with 37 PRO dimmers. I'm sure I missed 1 or 10. There is no easy way to check.
7. I'd also like to see the load type for hybrid keypads displayed on the design screen. Again, no easy way to check.
8. On the programming screen...Rather than graphic display of control stations I would like to see a tree list of all the loads sorted by assigned room - not by device location. Similar to HomeWorks.
9. Does the owner have the ability to edit shared scenes? Telling them that changing GOODNITE at one location changes all locations is better than telling them they have to repeat the procedure everywhere or the buttons will do different things.
More to follow...