Originally Posted by
davewilt
Q1: Will MSOPS5 work well with a non-dimmable LED driver?
Any Maestro motion switch is a normal switch, so I can’t imagine why it wouldn’t work. A “soft on-off” makes no sense to me unless they are referring to a dimmer that has a fade feature (like Maestro dimmers).
Q2: What are my options for one motion sensor working with many switches & dimmers?If you want one sensor to control multiple loads, I’d use the Maestro wireless system. There’s no real reason to hard-wire sensors, and if you did you’d have to use a HomeWorks or GRAFIK Eye system. Maestro Wireless model numbers are as follows:
The model numbers break down as follows:
MRF2-6CL: NO neutral, good for incandescent as well as screw-in dimmable LED
MRF2-6ND: Neutral required, good for incandescent and forward-phase dimmable LED. Lower minimum load.
MRF2-6ELV: Neutral required. Reverse phase control, for ELV fixtures
MRF2-6ANS: Neutral switch.
MRF2-8S-DV: Non Neutral switch (40W minimum load)
Any Radio Powr Savr sensors will work with this system, including LRF2-OCR2B-P (ceiling mount) and LRF2-OWLB-P
Hope this helps!