Are all Pico Remotes compatible with the Caseta system or only some of them?
Are all Pico Remotes compatible with the Caseta system or only some of them?
There are a couple of Picos that Caseta does not support at all - some of the 4-button, the new scene controls, et. al. All PJ2 remotes use the same communication protocol so yes, you could use a Pico with lighting engraving to control shades, etc.
Convergence Technologies Raleigh, North Carolina
www.convergenceusa.com
So any Pico that starts with PJ2 is Caseta compatible? Are there any others or just the PJ2 Picos?
Thanks...
Is the Pico Remote Model # PJ-3BRL compatible with Caseta Wireless dimmer PD-6WCL.
If not, what wireless (Maestro or Caseta) dimmer switches that will control a circuit of LED lighting are compatible with this model of Pico Remote?
Many thanks!
- - - Updated - - -
Is the Pico Remote Model # PJ-3BRL compatible with Caseta Wireless dimmer PD-6WCL.
If not, what wireless (Maestro or Caseta) dimmer switches that will control a circuit of LED lighting are compatible with this model of Pico Remote?
Many thanks!
Some earlier models were specific to families of controls. Maestro Wireless had its own Picos, Grafik Eye had its own, etc. These were combined into the PJ series which evolved into PJ2. Some of the older models may still be out there.
Caseta does support some but not all of the 4-button models. It does look like Caseta supports the new scene Picos.
Convergence Technologies Raleigh, North Carolina
www.convergenceusa.com