Results 1 to 3 of 3

Thread: Re-setting question-main repeater and all devices

  1. #1
    Junior Member
    Join Date
    Nov 2014
    Posts
    4

    Re-setting question-main repeater and all devices

    The original setup for a RadioRa 2 system for a client was done manually. They now want me to come in and add scenes/make changes. I plan on adding their system to the Lutron software in order to "re-program". I believe, correct me if I'm wrong, I will have to reset the main repeater to the default by doing the triple tap of the test button sequence to return to the factory settings in order to program. Will I also need to reset the devices through out the house or just the main repeater before I enter everything into my laptop, program, activate, and transfer?
    Thanks,
    Eric

  2. #2
    Authorized Lutron Contributor
    Join Date
    Apr 2013
    Posts
    407
    Once you default the main repeater it will also default all of the devices that are assigned to the main repeater. You will then be able to activate the devices into your project file.

  3. #3
    Junior Member
    Join Date
    Nov 2014
    Posts
    4
    Craig,

    Thanks for the response.

    Just to clarify, for others that may read my original thread, when I say "manually programed" I meant to say the client did a "walk around programming/activation". I plan on going to the site, return the main repeater to the factory defaults, create a project file, activate, and transfer the new scenes. Next time they want changes it will be much easier with my laptop and their file.


    Eric

Similar Threads

  1. Cant find Main Repeater
    By Armando B. in forum Troubleshooting - RA2
    Replies: 9
    Last Post: 04-27-2015, 01:57 PM
  2. Main repeater debug mode
    By aries in forum Troubleshooting - RA2
    Replies: 3
    Last Post: 07-24-2014, 09:48 AM
  3. Caution when Out-of-Boxing the Main Repeater
    By Armando B. in forum Best Practices - RA2
    Replies: 0
    Last Post: 03-03-2014, 06:59 PM
  4. possible bricked RA2 Main repeater- Need help
    By dmf6978 in forum Troubleshooting - RA2
    Replies: 3
    Last Post: 02-25-2014, 07:40 AM
  5. 2 main repeater systems
    By Craig W. in forum Design Assistance - RA2
    Replies: 0
    Last Post: 09-26-2013, 04:55 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •