Thanks Thanks:  1
Likes Likes:  1
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: 3 Way Dimmer - 1000 W - LED and Incandescent

  1. #1
    Junior Member
    Join Date
    Nov 2018
    Posts
    1

    3 Way Dimmer - 1000 W - LED and Incandescent

    I have a stairwell chandelier with (24) 40 watt bulbs. It is on the same circuit with 2 LED can lights.
    I am looing for a dimmer 3-wa dimmer that's that spec. I have bought a Lutron TG-103PH but I noticed that it is for Incandescent and halogen. Does anyone make a dimmer for the 1000 watt and led combo?

  2. Thanks Justin F. thanked for this post
    Likes Justin F. liked this post
  3. #2
    Authorized Lutron Contributor
    Join Date
    Sep 2018
    Posts
    87
    Hello CardsFan1,
    Thank you for your post! Unfortunately, Lutron does not manufacture a dimming control that is rated for LEDs as well as that large of an Incandescent/Halogen lighting load. You would need a phase adaptive power module (PHPM-PA-120-WH) with a compatible Neutral based dimming control (example: Caseta Wireless PD-5NE) in order to achieve this. The information on both of these Lutron products can be found at the below:
    - PHPM-PA-120-WH (http://www.lutron.com/en-US/pages/Su...er=PHPM-PA-120)
    - PD-5NE (http://www.lutron.com/en-US/pages/Su...lNumber=PD-5NE)

    Hope this info helps!

    -JustinF.

Similar Threads

  1. MA-1000-WH-CSA runs hot
    By Keen Construction in forum Troubleshooting - Controls
    Replies: 5
    Last Post: 05-01-2018, 08:56 PM
  2. TG-600PR Dimmer - Intermittent Flickering Incandescent
    By cheerfulcactus in forum Troubleshooting - Controls
    Replies: 0
    Last Post: 10-22-2017, 06:23 PM
  3. Which smart dimmer for magnetic transformers w/ mix of LED & incandescent
    By TwoCoasts in forum General Discussion - LED
    Replies: 3
    Last Post: 04-13-2017, 12:03 PM
  4. Combination of incandescent/ LED on ELV dimmer
    By bma sparky in forum General Discussion - LED
    Replies: 3
    Last Post: 05-22-2015, 11:04 AM
  5. Help needed! 1000 Watts LEDs on RRD-10ND - do I need a PHPM-PA?
    By RA2-Designer-Gal in forum Design Assistance - RA2
    Replies: 6
    Last Post: 11-28-2014, 11:11 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •