Thanks Thanks:  0
Likes Likes:  0
Results 1 to 5 of 5

Thread: 3 gang wall plate - 2 rocker, 1 Pico?

  1. #1

    3 gang wall plate - 2 rocker, 1 Pico?

    I had 3 way switch, replaced one (single gang) with Caseta dimmer. 2nd switch is part of 3 gang (was 3 rocker).
    I still hope to find a way to keep the rocker in connection with the Caseta dimmer (and use the Pico as handheld remote).

    But if that is NOT possible, I need to install the Pico into the existing 3 gang setup, and need to find a matching wall plate.
    I HAVE found a 3 gang, 2 toggle, 1 rectangle wall plate, but from a different brand. Does Lutron not offer such a wall plate?

    https://www.topgreener.com/pub/media...l._sl1500_.jpg


  2. #2
    Junior Member
    Join Date
    Dec 2018
    Posts
    1
    If I am understanding this correctly you want to remove the 3-way switch at the 3 gang plate and use the handheld pico remote instead? Honestly, I would just buy a 2nd pico Remote / pico wall adapter and install at the 3 gang rocker plate. Keeping your 2nd pico remote handheld. Pico remotes and wall adapters are fairly cheap enough for this in my opinion.

  3. #3
    I bought 2nd pico and found 2 toggle 1 rectangle wall plate. Still not sure why they don't just make a true 3 way kit that allows to keep the non dimmer toggles.

  4. #4
    Senior Member
    Join Date
    May 2015
    Posts
    307
    The Pico, as well as all Caseta switches and dimmers, are the standard Decora size. This is the rectangular hole.

  5. #5
    Junior Member
    Join Date
    Feb 2019
    Posts
    6
    Quote Originally Posted by davisadm View Post
    The Pico, as well as all Caseta switches and dimmers, are the standard Decora size. This is the rectangular hole.
    Agree...if I don't want a Caseta switch in a multi switch plate, I just go out and buy a new Decora style switch. You can get a basic Decora switch for $9, and a lighted one for $12.

Similar Threads

  1. Wall plate won't fit Grafik T keypad?
    By atmatthewat in forum Troubleshooting - RA2
    Replies: 2
    Last Post: 08-31-2020, 02:29 PM
  2. Replies: 8
    Last Post: 06-14-2018, 08:44 PM
  3. Replies: 12
    Last Post: 03-19-2018, 11:25 PM
  4. Face plate for 3 gang caseta set up..
    By cwsims84 in forum General Discussion - CAS
    Replies: 3
    Last Post: 04-30-2017, 07:02 AM
  5. Pico added to gang
    By Dimerize in forum Design Assistance - CAS
    Replies: 5
    Last Post: 01-20-2016, 01:43 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •