Hi, first post on what looks like a great forum.
I am currently carrying out an electrical installation on a large property in the UK.
The architect has specified the use of Lutron grafik eye 3106.
He has specified
1 x 6 zone controller to run the lights in the kitchen ( set up and works fine )
1 x 6 zone controller to run the dining room, hallway, landing and lounge
1 x 6 zone controller to run the master bedroom and en-suite lighting
Each room will have its own wall station with the lights in the rooms working independently.
Now this is where my problem is. I was always under the assumption you needed to have 1 control box for each individual room.
I have run through the installation booklet but it doesn't really say anything about programming the switches to switch certain zones/rooms? is this possible? if so can anyone (in lamens terms) explain to me how I go about programming this?
The architect has used this system on other properties and is positive it should work.
Any help would be much appreciated!!!
Look forward to hearing from you.
Ed