Thanks Thanks:  2
Likes Likes:  2
Results 1 to 4 of 4

Thread: Programming time out after 20 minutes

  1. #1
    Junior Member
    Join Date
    Jun 2016
    Posts
    9

    Programming time out after 20 minutes

    How do i program a HQRD -8ANS to turn on a fan and time off after 20 minutes

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    1,147
    Program a sequence where step 1 turns the fan on, the stop sequence turns it off. Check "Automatically go to next step after (time)."
    Under program-devices, click the "device location" drop down and check "show all dimmers"
    You can now assign the sequence to the switch.
    When they turn the fan on, it will run for the time you specified in the sequence. If the press the 8ANS before the timeout, it will go to the next (off) step.
    LED, Incorporated
    Raleigh, NC 27614

  3. Thanks Josh R. thanked for this post
    Likes Josh R. liked this post
  4. #3
    Junior Member
    Join Date
    Jun 2016
    Posts
    9
    Quote Originally Posted by randyc View Post
    Program a sequence where step 1 turns the fan on, the stop sequence turns it off. Check "Automatically go to next step after (time)."
    Under program-devices, click the "device location" drop down and check "show all dimmers"
    You can now assign the sequence to the switch.
    When they turn the fan on, it will run for the time you specified in the sequence. If the press the 8ANS before the timeout, it will go to the next (off) step.
    so i set sequence to 20 minutes and auto stop, do i check 1 loop or time. Also noticed the selected 8ANS says setting is Lock?

  5. #4
    Senior Member
    Join Date
    Oct 2013
    Posts
    1,147
    1 loop. Don't use the lock feature. I believe that locks out the 8ans so they can't use it again until it is unlocked.
    LED, Incorporated
    Raleigh, NC 27614

  6. Thanks Josh R. thanked for this post
    Likes Josh R. liked this post

Similar Threads

  1. Time Clock Events and daylight savings time
    By Soccerstar11 in forum Troubleshooting - RA2
    Replies: 1
    Last Post: 03-15-2017, 11:49 AM
  2. LEDs don't turn on for few minutes
    By andrew-mt in forum General Discussion - CAS
    Replies: 1
    Last Post: 04-24-2016, 10:22 AM
  3. Time Clock Losing 10 minutes each day????
    By Lowkey5 in forum Troubleshooting - RA2
    Replies: 4
    Last Post: 03-25-2015, 04:07 PM
  4. Daylight Saving Time - Conditional Programming
    By ekimla in forum Programming - HWQS
    Replies: 2
    Last Post: 03-18-2014, 03:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •