Thanks Thanks:  0
Likes Likes:  0
Results 1 to 6 of 6

Thread: HWQS Integration with Onkyo AV Receiver

  1. #1
    Junior Member
    Join Date
    Oct 2017
    Posts
    3

    Angry HWQS Integration with Onkyo AV Receiver

    Hi,

    Im looking to have a new integration between Lutron Homeworks QS and Onkyo AV receiver.

    I checked all posts under 3rd party integration and cannot find anything related to integration with Onkyo AV receiver.

    currently im using Lutron Designer version 13.2.0 and I have added Ethernet Device and configured the IP address and port 60128 which is the default port the receiving all commands set and I have assigned the Ethernet device to QS Ethernet. and I got the command set sheet from Onkyo that used for integration (i.e. power on, power off etc...) but it's not working.

    please I need your help to fix this issue.

  2. #2
    Junior Member
    Join Date
    Oct 2017
    Posts
    3
    anyone can help please?

    I did two different tests to control the Onkyo AV receiver as following:
    1- from MacBook Notebook which is working (IP address is 10.10.10.129).
    2- from Lutron Processor which is NOT working (IP address is 10.10.10.3).

    You can find below the command that being used for Power Off and Power ON the Onkyo AV Receiver:
    1- Power ON: ISCP\x00\x00\x00\x10\x00\x00\x00\x08\x01\x00\x00\x 00\x211PWR01\x0D\x0A
    2- Power Off: ISCP\x00\x00\x00\x10\x00\x00\x00\x08\x01\x00\x00\x 00\x211PWR00\x0D\x0A

    In addition, I did two packet captures for the working (MacBook Notebook) and NOT working (Lutron Processor). Attached are the packet captures files.
    And I have generated a support file from Lutron Designer that will help for troubleshooting. Attached is the Lutron Support file.





    Note: the IP address of Onkyo AV Receiver is 10.10.10.137.)


    Regards,

  3. #3
    Senior Member
    Join Date
    Sep 2013
    Posts
    423
    have you tried reaching out to Lutron tech support directly?

  4. #4
    Junior Member
    Join Date
    Oct 2017
    Posts
    3
    thanks for your reply, I have opened a ticket with Lutron support and im waiting for their feedback,

  5. #5
    Junior Member
    Join Date
    Feb 2019
    Posts
    1
    having the same issue...any luck with support?

  6. #6
    Did you take a look at the 3rd party Homeseer (HS3), it have option to control QS and also control Onkyo, Harmony and more.

Similar Threads

  1. Help regarding external IR receiver
    By Snacker in forum General Discussion - HWQS
    Replies: 1
    Last Post: 04-09-2017, 03:51 PM
  2. HWQS to Ra2 integration
    By jmota in forum 3rd-party Integration - HWQS
    Replies: 2
    Last Post: 03-03-2017, 09:14 AM
  3. ELAN Integration with HWQS
    By NHurley in forum 3rd-party Integration - HWQS
    Replies: 1
    Last Post: 05-06-2015, 12:52 PM
  4. IR Receiver Options
    By David C. in forum 3rd-party Integration - HWQS
    Replies: 1
    Last Post: 01-26-2015, 04:21 PM
  5. RF Receiver Rapid Red Flashing
    By Anna W. in forum Troubleshooting - Shades
    Replies: 6
    Last Post: 11-21-2014, 11:05 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •