Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4

Thread: Dimmer Failing

  1. #1
    Junior Member
    Join Date
    Sep 2018
    Posts
    3

    Dimmer Failing

    I have a dimmer that appears to just have failed. One light plugged into the circuit comes on dimly, the other not at all. The LEDs on the dimmer will, at times, chase up and down. I believe the dimmer is a 6B38 600 W programmable dimmer.

    Has it finished it's life cycle. Is it safe?

    Thanks,

    Alan
    Last edited by AlanS; 09-13-2018 at 01:02 PM. Reason: Corrected model #

  2. #2
    Junior Member
    Join Date
    Sep 2018
    Posts
    3
    The correct model information is MAESTRO MAW-600

  3. #3
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    The dimmer has a minimum 50 watt load. It might be 60w for that model. That dimmer will perform erratically when trying to control LED bulbs.
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

  4. #4
    Junior Member
    Join Date
    Sep 2018
    Posts
    3

    Thx

    Thanks. I replaced it with a standard switch and discovered one lamp was out. The remaining lamp was 60 watt (incan). So I'll replace the other lamp and then try the dimmer again.

Similar Threads

  1. Single M.I failing
    By Matt@ADG in forum Troubleshooting - HWQS
    Replies: 8
    Last Post: 11-24-2015, 11:30 PM
  2. Juno LED diodes burning up and failing...only in one room?? PLEASE HELP!!
    By JeffCohenYusen in forum Performance Issues - LED
    Replies: 1
    Last Post: 03-11-2014, 11:27 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •