Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: Correct Lutron dimmer for magnetic MR 16 led circuit

  1. #1
    Junior Member
    Join Date
    Sep 2018
    Posts
    1

    Correct Lutron dimmer for magnetic MR 16 led circuit

    I have a 7 light circuit of 12 volt magnet transformer lights with MR 16 leds. Each of the 7 ceiling lights has a built in 120v to 12v magnetic transformer. I am switching from halogen to leds and I wish to know what type of Lutron dimmer to use. I prefer to use the Diva line of dimmers. Would the Diva 600 watt magnet dimmer work?

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    627
    I would not recommend MR16 LEDs on a magnetic transformer designed for incandescent MR16s. LEDs do some things that will be amplified by the magnetic transformer. Magnetic Transformers designed to work with LEDs have additional circuitry to compensate (which is why they are called drivers).

    You can try the DVLV-600 but I would put the chances of it working at 5-10%.
    Element Integration
    5621-122 Departure Drive
    Raleigh, NC 27616
    www.elementintegration.com

  3. #3
    Authorized Lutron Contributor
    Join Date
    Jan 2018
    Posts
    108
    Hello Leehelp,

    Thank you for your post!

    Dimming MR16 LEDs can be a big issue since they are all being manufactured differently, and so the dimming performance will vary greatly from one to the next. Many LEDs on the market (including ones labeled as dimmable) have issues when placed on dimming controls. On top of that, MR16 LEDs are generally one of the toughest types of LED to dim. The issue with these lamps is due to the interdependencies between the lamp, transformer, and dimmer. Only certain transformers work OK on a given LED MR16 and even then, only certain dimmers will work. Also, the MR16 lamps generally have some shimmer as you dim down.

    All of our recommendations can be found on the following application note. Anything outside of this application note is considered untested, and therefore we are unable to guarantee LED compatibility in those applications. The first page is our MLV recommendations.

    http://www.lutron.com/TechnicalDocum...ary/048559.pdf

    Hope this helps!

    Julia K.

Similar Threads

  1. Correct RA2 LED Dimmer minimum wattage
    By Captainminibar in forum General Discussion - RA2
    Replies: 2
    Last Post: 06-30-2018, 05:20 PM
  2. 3 way switch circuit --> Lutron dimmer replacement issues
    By Subdermal in forum Troubleshooting - Controls
    Replies: 4
    Last Post: 12-13-2017, 12:09 PM
  3. Replies: 2
    Last Post: 12-09-2017, 10:53 AM
  4. Which smart dimmer for magnetic transformers w/ mix of LED & incandescent
    By TwoCoasts in forum General Discussion - LED
    Replies: 3
    Last Post: 04-13-2017, 01:03 PM
  5. dimmer on magnetic low voltage lighting ?
    By hgmobile in forum General Discussion - CAS
    Replies: 4
    Last Post: 04-12-2016, 09:11 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •