I have 4 WAC Oculux 3.5" LEDs (model R3BRD-F927-WT) connected to a PD-5NE ELV+ Dimmer. The lights worked perfectly for several months. One day I decided to adjust the high- and low-end trims. Immediately after doing that, one of the lights would only go to ~70% brightness, whereas all of the other lights went to full brightness. I reset dimmer but couldn't get the light to go to full brightness so I replaced the trim and the housing.

With the new trim and housing, the light came on with full brightness but now it flickers. It is the only light that flickers (I have 3 others on the same switch). It is one of the middle bulbs in the series. I have 2 other ELV dimmers with the same recessed lights in different rooms and haven't had any issues. I have again tried resetting the dimmer and adjusting the trim, to no avail.

Does anyone have any suggestions? Thanks in advance.

Aside from this issue, the lights are incredible and I would highly recommend them. Perfect dimming with the ELV dimmer.