-
Switch Maestro between Vacancy/Occupancy?
In a bathroom, during the day I have a Maestro sensor to turn on the lights when someone enters and turn them off x minutes after they leave.
At night, the bathroom lights shine into the bedroom, disturbing the sleepers.
Is there a way to disable the Occupancy sensing at night or will I need to change to a complete Vacancy only operation? Some other solution? Thanks for helping.
-
The sensor has the opposite feature. You can program it so if there is enough ambient light it will not turn the lights on.
The sensor you have should have a vacancy only mode so you would not have to buy another device.
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Dislikes
-
Hello Kupuna,
randyc is correct, unfortunately our only option is to make the sensor a vacancy sensor as there is no way to only disable it at night.
Please see the link below to the programming guide to see how to change the sensor mode:
http://www.lutron.com/TechnicalDocum...ary/048461.pdf
Julia K.