Switch Maestro between Vacancy/Occupancy?

[Kupuna]

In a bathroom, during the day I have a Maestro sensor to turn on the lights when someone enters and turn them off x minutes after they leave.
At night, the bathroom lights shine into the bedroom, disturbing the sleepers.
Is there a way to disable the Occupancy sensing at night or will I need to change to a complete Vacancy only operation? Some other solution? Thanks for helping.

[randyc]

The sensor has the opposite feature. You can program it so if there is enough ambient light it will not turn the lights on.

The sensor you have should have a vacancy only mode so you would not have to buy another device.

[Julia K.]

Hello Kupuna,

randyc is correct, unfortunately our only option is to make the sensor a vacancy sensor as there is no way to only disable it at night.

Please see the link below to the programming guide to see how to change the sensor mode:

http://www.lutron.com/TechnicalDocum...ary/048461.pdf

Julia K.