I verified that the Eaton RL4069S1EWHR LED retrofit downlight was on the compatibility list for an MACL-153M prior to purchasing. Unfortunately this combination is intermittent at best. I tried this downlight in two different locations with two different dimmers (both MACL-153M) and had the same results. In one location the dimmer was a single location and the other was a 3-way with a compatible MA-R.
When turned on, the dim indicator lamps ("night mode") may light properly and when the dimmer is pressed the LED will light. At times when the LED is off, the indicator lamps on the dimmer will go out and blink very dimly and when this occurs the LED will not light regardless of which button (T, R, L) on the dimmer is used.
I have tried disabling the indicator lamp "night mode" via advanced programming but this did not have any impact: The LED would still not turn on.
Is this LED truly compatible?
Are there any other recommendations or suggestions?