I temporarily removed a pendant light on a maestro dimmer and having reinstalled it there are no indicator leds on and I cannot turn on the light. Any help would be greatly appreciated.
I temporarily removed a pendant light on a maestro dimmer and having reinstalled it there are no indicator leds on and I cannot turn on the light. Any help would be greatly appreciated.
Maestro dimmers have a 50 watt minimum load. If you go below the load, they will act like they are dead - no LEDs, no response. If it is on a lift, the lift typically has to be all the way up for it to make contact.
Also, check the gap/FASS switches on any remote dimmers. Any one set to off will kill the circuit.
Convergence Technologies Raleigh, North Carolina
www.convergenceusa.com