Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: Integrating Somfy RTS shades with Grafik Eye

  1. #1
    Junior Member
    Join Date
    Aug 2018
    Posts
    1

    Integrating Somfy RTS shades with Grafik Eye

    I am new to Lutron integration. I am wanting to control Somfy RTS shades with the Grafik eye system but I am having issues. I am using the Somfy dry contact interface and the QSE-IO. Everything is good to go on the shade and Somfy interface side, but the shades are behaving erratically when I try to operate them via the Grafik Eye. Upon doing some research, I have found that the Somfy dry contact interface requires a .5 sec momentary contact closure but the QSE-IO outputs is a default fixed duration of .25 sec. Can I adjust the duration on the QSE-IO side of things? Or is there another possible work around? Any information would be greatly appreciated.

    Jeff

  2. #2
    Super Moderator
    Join Date
    May 2013
    Posts
    420
    Hello Jeff,
    Thank you for your post.
    The QSE-IO in the current setup is fixed at the 250ms pulse. Only a processor based system such as Homeworks QS can the pulse time be changed.

Similar Threads

  1. Homeworks QS controlling Somfy Shades
    By acculite in forum 3rd-party Integration - HWQS
    Replies: 6
    Last Post: 02-23-2018, 11:35 AM
  2. Integrating with RF
    By spherex in forum 3rd-party Integration - RA2
    Replies: 6
    Last Post: 03-22-2017, 09:55 PM
  3. Replies: 1
    Last Post: 10-11-2016, 06:49 PM
  4. Somfy shades and HWQS
    By Betsy in forum 3rd-party Integration - HWQS
    Replies: 1
    Last Post: 05-28-2015, 08:15 AM
  5. Integrating Sivoia QS wired/wireless shades with HW Illumination
    By Blair S. in forum 3rd-party Integration - Legacy HW
    Replies: 0
    Last Post: 07-29-2013, 07:28 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •