I know this topic has been discussed over and over. I have read through many of them (not sure all), but none helped me solving my issue. I have Inclusive with 2 Main Repeaters. On 1st Repeater, 90+ devices (&2 Auxillary Repeaters), and 2nd Repeater 40+ devices (&1 Auxillary Repeater). Here are my issues regarding transfer errors:
- Only 1st Main Repeater shows errors, some times 12 devices out of 90+, sometimes 6 devices. The 2nd Main Repeater never had any issues.
- The devices that had transfer errors gave different error codes, cannot communicate (out of range), cannot update database, etc.
- I ran diagnostics, found 8 devices with communication errors. All 8 devices are within 14 feet of the Main Repeater.
- I tried to deactivate, and reactivate, with no success
- I have tried to connect directly to the Main Repeater, still same problem
I would love to hear some advice. I am tempted to deactivate the failed devices on the 1st Main Repeater, and put on the 2nd one. Not sure if that may solve the problem.