I have the following setup.
1) One 3-way switch that I've installed a MS-OPS5M 3-way occupancy sensing switch. After installing this I tested and it worked fine as long as the other 2 switch were always in the on position. So far so good.
2) Next i wanted to change the second 3-way switch to use the same MS-OPS5M w-way occupancy sensing switch. This installed fine, but now only 1 switch is controlling the on off state of the light.
3) I also have a manual 4-way switch, that i would like to keep installed as is, but I'm guessing i need to modify its wiring to that the other 2 switches will work properly.
So my questions are:
- How to I modify the MS-OPS5M 3-way occupancy sensing switches so they function properly. The included documentation only includes how to moving an existing 3-way switch to work correctly not how to modify the wiring of an existing MS-OPS5M switch to work correctly.
- And second, how do I modify the existing 4-way switch wiring so it can stay installed, but work correctly with the other 2 occupancy sensing switches.
Thanks