Thanks Thanks:  1
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: Multiple Light Dimming with PowPak RMJS-8T-DV-B?

  1. #1
    Junior Member
    Join Date
    Jul 2018
    Posts
    4

    Multiple Light Dimming with PowPak RMJS-8T-DV-B?

    In order to dim 3 LED lights with a single PowPak RMJS-8T-DV-B, I just wire all three lights together the same as if I was wiring a single light, yes?

    The lights I am using are: https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

    I am using a PJN-3BRL-GWH-L01 Pico control.

    Thanks,

    John in Montana

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    There are 2 controls involved (in the same device).

    Line voltage - wire the same as if you were connecting to a mechanical switch. This will provide on/off control. 8 amps max.

    Low voltage - you need a LV wire from the control to each fixture. These can be daisy chained but is polarity sensitive. This provides dim control only. 60ma max.
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

  3. Thanks Beardog thanked for this post
  4. #3
    Junior Member
    Join Date
    Jul 2018
    Posts
    4
    Quote Originally Posted by randyc View Post
    There are 2 controls involved (in the same device).

    Line voltage - wire the same as if you were connecting to a mechanical switch. This will provide on/off control. 8 amps max.

    Low voltage - you need a LV wire from the control to each fixture. These can be daisy chained but is polarity sensitive. This provides dim control only. 60ma max.
    Thanks Randy, that is what I thought on the daisy chain, just wanted to confirm. Appreciate the help!

    John

Similar Threads

  1. Best LED Pot Light Retrofits for dimming
    By gwaites in forum General Discussion - RA2
    Replies: 6
    Last Post: 03-11-2020, 10:02 AM
  2. Load Adapter for LED Tape Light Dimming?
    By tabraham in forum Troubleshooting - CAS
    Replies: 8
    Last Post: 04-20-2018, 08:16 PM
  3. Dimming WAC invisiled Pro2 tape light
    By sparkjumper2 in forum Troubleshooting - RA2
    Replies: 5
    Last Post: 04-19-2018, 05:41 PM
  4. Phase control dimming PowPak
    By pscheetz in forum Design Assistance - Vive
    Replies: 2
    Last Post: 04-18-2016, 09:31 AM
  5. Maestro Fan/Light control for multiple Fans
    By paulhanks in forum Design Assistance - Controls
    Replies: 0
    Last Post: 01-15-2015, 11:35 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •