-
Multiple Light Dimming with PowPak RMJS-8T-DV-B?
In order to dim 3 LED lights with a single PowPak RMJS-8T-DV-B, I just wire all three lights together the same as if I was wiring a single light, yes?
The lights I am using are: https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
I am using a PJN-3BRL-GWH-L01 Pico control.
Thanks,
John in Montana
-
There are 2 controls involved (in the same device).
Line voltage - wire the same as if you were connecting to a mechanical switch. This will provide on/off control. 8 amps max.
Low voltage - you need a LV wire from the control to each fixture. These can be daisy chained but is polarity sensitive. This provides dim control only. 60ma max.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
-
Originally Posted by
randyc
There are 2 controls involved (in the same device).
Line voltage - wire the same as if you were connecting to a mechanical switch. This will provide on/off control. 8 amps max.
Low voltage - you need a LV wire from the control to each fixture. These can be daisy chained but is polarity sensitive. This provides dim control only. 60ma max.
Thanks Randy, that is what I thought on the daisy chain, just wanted to confirm. Appreciate the help!
John