Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: Integral(direct-wired) contact closure input does not work

  1. #1
    Junior Member
    Join Date
    Feb 2017
    Posts
    5

    Integral(direct-wired) contact closure input does not work

    The integral contact closure input on the bank of the QS Timeclock (QSGR-TC-3S-WH-CPN5825),Unit setting:CCI Mode-timeclock; CCI Type-Maintained
    When contact(Terminal A and B) open/release ,timeclock was not disabled. Wiring is ok.
    What's wrong?
    Thanks.

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    1,151
    The instructions are not very clear but the way I read it, if you use a maintained contact the clock is disabled when the contact is closed, enabled when the contact is open.
    LED, Incorporated
    Raleigh, NC 27614

  3. #3
    Junior Member
    Join Date
    Feb 2017
    Posts
    5
    Contact clousre or Open does not work.

Similar Threads

  1. Outdoor temperature that works with vcrx contact closure
    By AustinB. in forum 3rd-party Integration - RA2
    Replies: 1
    Last Post: 03-11-2018, 07:02 PM
  2. contact closure output on RR-VCRX stuck in closed state
    By metamatt in forum Troubleshooting - RA2
    Replies: 0
    Last Post: 10-04-2017, 01:08 PM
  3. Replies: 3
    Last Post: 10-02-2017, 10:56 AM
  4. Contact closure control from app?
    By AndyM in forum General Discussion - HWQS
    Replies: 5
    Last Post: 09-27-2015, 03:59 PM
  5. External Third Party Contact Closure Switch
    By AndrewLivewire in forum Programming - HWQS
    Replies: 2
    Last Post: 03-30-2014, 04:50 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •