doing some research on past threads, I appear to be having a slightly different problem that what I've seen addressed. I have expanded an existing system, everything was working well as programed. Yesterday I tweaked a few scenes and now am getting multiple intermittent transfer errors. By intermittent I mean the errors hop around to several different devices each time I try to transfer. There is one device that seems to consistently error, but there are others that transfer some time but error other times.
The error is: Error: Unable to transfer to room > device location > device. The device is not communicating. Either the device is not powered on, out of range of any repeaters, or has been deactivated.
All devices are well within range of the repeater, and are activated.
Here is what I tried so far:
1. Reset the error device to factory and reactivated.
2. Rebooted the main repeater
3. Multiple attempts to transfer
4. Ran diagnostics, which at any given time matches the devices that are erring during transfer
Any suggestions? The one thing I saw in a previous thread was that I may have a corrupt .ra2 file. Hoping this isn't the issue as I haven't been keeping .versions with the expansion so would likely need to go back and rebuild the project.
Thanks in advance for any that can help. I've turned to this forum before and the help has been tremendously fast and on the mark.