Thanks Thanks:  1
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5

Thread: HomeWorks and Lutron Home+ app

  1. #1

    HomeWorks and Lutron Home+ app

    Hi,

    I have pretty old system .
    It is HomeWorks (not QS) . I programm it and trying to connect with Home+ app on iphone .

    app discover system very fast but im not able to connect .

    I tried to put login and password for programming so default : LutroGUI and jetski (info that this is programming login account or something like this ) .
    I also add login and password in setting for ethernet telnet connection and for web connection, to make it easier i put lutron and lutron as a password and login .

    but still im not able to connect

    Is it possible to use this app with this system ? usually im working with HWQS so i used Home+ app before .

    Thank you for any help

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    912
    HomeControl+ does support HomeWorks Illumination.
    On link 9:
    Enable dimmer levels, keypad buttons and keypad LEDs.
    Disable GE scenes, timed events.
    Do not suppress anything.
    Under control station programming:
    Select the device tab (under the image of the keypad).
    Enter the desired name under "Web & mobile device name"
    Change "Web & mobile device enabled" to true.
    On the Panel Assignment screen
    Select the processor and make sure "Webserver enabled" is true.
    Telnet port 23 is fairly common. I always move mine to 5023. I believe there is a limit of 40 devices. No editing buttons or timed events. Basically just a big keypad.
    LED, Incorporated
    Raleigh, NC 27614

  3. #3
    Senior Member
    Join Date
    May 2014
    Posts
    148
    Is this app still going to be available and supported? I thought it was being pulled as of this past September but I recently downloaded it. I have a system that was using AMX for an interface but Iím pulling it for varisous reasons and the client isnít likely going to want to pay to upgrade to QS in order to use the connect app but if the LH+ app isnít available they might.
    VAV
    Danbury, CT

  4. #4
    Senior Member
    Join Date
    Oct 2013
    Posts
    912
    Officially unavailable and unsupported. Clearly still available in the App Store. When it will disappear is anyone's guess. I suspect Tech Support will still answer questions, but again, for how long?
    LED, Incorporated
    Raleigh, NC 27614

  5. #5
    Authorized Lutron Contributor
    Join Date
    Sep 2018
    Posts
    32
    Thank you Randy and Vining,

    The app will be still available to download until September 15th 2019. Which then it will be removed.

    New account creation fro remote access via the app was turned on September 15th 2018.

    Hope this helps!

  6. Thanks randyc thanked for this post

Similar Threads

  1. How can I get Lutron Homeworks QS Software
    By elkriso83 in forum Programming - HWQS
    Replies: 1
    Last Post: 04-17-2018, 10:42 PM
  2. Lutron and Homeworks QS commands
    By akcirc in forum 3rd-party Integration - Shades
    Replies: 1
    Last Post: 02-28-2018, 11:47 PM
  3. Lutron C5-XPJ-16A Ecosystem & Homeworks QS
    By Kingfisher in forum Design Assistance - HWQS
    Replies: 3
    Last Post: 02-19-2018, 09:10 AM
  4. Lutron Homeworks 4, Add Control4?
    By xyber in forum 3rd-party Integration - HWQS
    Replies: 1
    Last Post: 12-27-2017, 02:12 PM
  5. Home kit using Lutron
    By Squill in forum General Discussion - CAS
    Replies: 10
    Last Post: 03-29-2016, 08:46 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •