Thanks Thanks:  0
Likes Likes:  0
Results 1 to 3 of 3

Thread: Where to find Integration ID for Grafik Eye QS on RA2?

  1. #1
    Junior Member
    Join Date
    Nov 2015
    Posts
    10

    Unhappy Where to find Integration ID for Grafik Eye QS on RA2?

    Help Please...

    Normally for me to locate a device on a RA2 system I use the integration report in the Inclusive software OR telnet to the RA2 Main Repeater to see the #Device info after a button press, etc.

    But for some reason the one(1) RA2 Grafik Eye QS installed (which works perfectly as part of the RA2 system) does not show up on the Integration Report and does not show a "Device ID" when its various buttons are pressed ... You do see the Output ID of the controlled items but not the Device\Integration ID that I need.

  2. #2
    Junior Member
    Join Date
    Jul 2017
    Posts
    1
    Mine show up twice: Once as the main device, basically as a keypad (of type QSGRJ instead of H or W keypad) with it's own device ID with buttons and LEDs, and again as each of the dimmer zones (each has it's own device ID). I have 4 of these in my system with 3,4,or 6 zones each.

  3. #3
    Senior Member
    Join Date
    Jun 2013
    Posts
    1,118
    BTCSD- which integration report are you using? Did you get the .csv or xml file?

    Check in the integration report tab that the Graphic Eye has a check mark in the ID box. If unchecked, these won't show up for integration.
    Business Development Associate- Design, Sales, Installation, and Programming of Smart Homes for Baker Electric Home Energy
    mbalay@bakerhomeenergy.com
    "Spread the light, brother" -Blake Richetta
    "If you think hiring a professional is expensive, wait until you hire an amateur" -Crustyloafer

Similar Threads

  1. Help me find a bulb!
    By Jebusfreek666 in forum General Discussion - CAS
    Replies: 5
    Last Post: 01-05-2018, 12:10 PM
  2. Help me find a compatible downlight
    By uscpsycho in forum Compatibility - LED
    Replies: 5
    Last Post: 05-04-2017, 08:52 AM
  3. Can't find Connect Bridge
    By brewcrew0 in forum Troubleshooting - RA2
    Replies: 8
    Last Post: 01-22-2017, 07:07 PM
  4. cant find Grafik T devices in essentials design
    By alonsoelectric in forum Programming - RA2
    Replies: 4
    Last Post: 05-14-2016, 08:41 PM
  5. Grafik Eye Integration
    By harricane in forum Design Assistance - Legacy HW
    Replies: 3
    Last Post: 05-28-2014, 02:36 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •