Here's my scenario.
The customer has a front doorbell that will trigger the foyer interior door light and chandelier to turn on when someone presses the doorbell button (nighttime only)
After 10 minutes or so, I would like to set the Foyer lights back to their previous settings. Sometimes the foyer lights could be Off, or if they are having a party or something, the lights could be set to something else.
This would be controlled by a phantom button press through an AMX control system.
Question is what is the best way to accomplish this.
I was thinking about using the rollback feature, but that sounds like roll back is designed more for Exhaust fans, or closets, etc., and would end up turning the lights off
Example, if the customer turns on the lights from a local dimmer, would the rollback feature set it back after the default dwell time? That would be annoying.
or,
Is there a way to capture the current dimmer level from a keypad press inside QS, and then set it back from another button press.
Example
Phantom Button 1 = press - save dimmer levels, release - turn doorbell lights on
Phantom Button 2 = press - restore saved dimmer levels
I think I already know the answer, but thought I'd see if anybody has done this before.
Thanks for any help